Water Jet Cutting – Why Opt for This Service
Water jet cutting companies provide services to the engineering and building industry for an assortment of materials. There are many ways in which water jet differ from laser jet different. Regardless if you’re a professional or hobbyist, you should be able to identify these differences so that you can choose the cutting method that is best for your exact requirements.
Water jet cutting makes use of some highly pressured water jet for cutting through materials. Such high intensity of pressure needed is reached by driving the water out from a tiny hole at pressures equal to a maximum of 60,000psi. To improve the cutting work as well as the abrasion, an element identified as garnett is thrown into the water.
The resultant cutting action is the same as when water naturally cuts its way through the ground and forms river beds over many hundred years, but done in a quick and accurate manner.
This type of “abrasive cutting” can effectively cut through a large assortment of materials and thicknesses, which gives it a cutting edge over laser jet which the range of materials an thickness it can effectively cut through is quite limited.
It can cut through aluminum, bronze, titanium, steel and other metal alloys, and also ceramics and stone like marble and granite, composites, fiberglass, and concrete to name only a few.
Based on the type of material, the maximum thickness can be 8 inches with tolerances that can range from 0.005 inches to 0.010 inches.
Water jet is well suitable to materials that may be damaged or negatively affected by heat, because it does not apply heat when cutting. A water jet cutter does not break the structural reliability of materials, and this is why it can be applied on plastics and wood, or other things which laser cutting cannot be applied.
The downward along with the lateral pressure applied when cutting the material is practically negligible, meaning there aren’t any fixture expenses or additional hassles to deal with.
Choosing the exact cutter for your particular building or engineering project will save money, time, as well as the trouble of replacing a sheet, if not length of construction material due to a cut that is not precise.
When you are not sure which option will work best for your particular needs, it would be wise to consult with a water jet cutting company since they are more knowledgeable and they can better establish which option is going to be well-suited for your explicit needs. If they tell you that water jet cutting will work for you, then perhaps you should heed their advice.